Smeg KT90GRE 90cm Chimney Wall Hood Slate Grey
- 90cm Chimney Cooker Hood – Decorative wall-mounted Smeg hood in slate grey with Victoria styling.
- Powerful Extraction – 3 speeds plus intensive mode with up to 788 m³/h extraction for strong cooking odours.
- Ducted Or Recirculating – Flexible installation with charcoal filters included as standard.
- LED Hob Lighting – Twin LED lights give bright, efficient illumination across the cooking area.
- Energy Efficient Performance – A rated cooker hood with aluminium anti-grease filters and control knobs.
£737.00
- Product Info
- Specification
- FAQ's
Smeg KT90GRE chimney hood in slate grey combines Victoria retro styling with powerful extraction up to 788 m³/h, bright LED lighting and flexible installation.
Smeg KT90GRE 90cm Chimney Wall Hood in Slate Grey
The Smeg KT90GRE 90cm chimney wall hood brings together powerful extraction and distinctive Victoria styling. Finished in slate grey with a gloss finish, this decorative wall-mounted hood features the nostalgic curves, chunky controls and signature branding that give the Victoria collection its character.
Designed to make a statement as well as keep your kitchen fresh, the Smeg KT90GRE offers 3 speeds plus an intensive mode, with extraction rates from 334 m³/h at minimum speed up to 788 m³/h on intensive. The maximum extraction rate is 567 m³/h, helping to tackle everyday cooking fumes and stronger odours with ease.
Victoria design with flexible installation
This 90cm decorative wall hood is suitable for ducted or recirculating installation, giving you flexibility to suit your kitchen layout. Ducting extracts cooking fumes and expels them outside using an optional vent kit, while recirculating mode passes air through active charcoal filters before returning cleaned air to the room.
Charcoal filters are included as standard with this hood. For ducted installation, the vent outlet is 150mm. Optional vent kits include SP150 and SP150FLAT for hoods with a 150mm diameter vent outlet, and SP215 and SP217 for hoods with a 120mm diameter vent outlet.
Powerful extraction for everyday cooking
Whether you are cooking daily meals or creating stronger aromas, the intensive extraction setting provides an extra boost when you need rapid clearing of steam and odours. The hood includes a 275W motor, 3 aluminium anti-grease filters and a non-return valve for effective performance.
Extraction and noise levels by speed are:
Speed 1: 334 m³/h, 49 dB(A)
Speed 2: 439 m³/h, 57 dB(A)
Speed 3: 567 m³/h, 62 dB(A)
Intensive speed: 788 m³/h, 69 dB(A)
LED lighting and efficient performance
Twin 1W LED lights provide clear, efficient illumination across the hob area, helping you see more clearly while cooking. The lights can also be switched on independently of the fan, making them useful for ambient kitchen lighting. The light colour temperature is 3000 °K, with an average illumination of 225 lux.
With an A energy efficiency rating, the Smeg KT90GRE delivers strong performance while helping to keep energy use in check. It also has a Fluid Dynamic Efficiency Class A, Lighting Efficiency Class A and Grease Filtering Efficiency Class C, with annual energy consumption of 59 kWh/year.
Key features and specifications
Product family: Hood
Hood type: Decorative wall hood
Width: 90 cm
Colour: Slate Grey
Finish: Gloss
Aesthetic: Victoria
Design: Chimney
Controls: Victoria control knobs, 2 controls, steel effect finish
Lighting: 2 LED lights
Anti-grease filters: Aluminium
Vent outlet: 150 mm
Minimum distance from electric hob: 650 mm
Minimum distance from gas hob: 750 mm
Nominal power: 278 W
Voltage: 220-240 V
Frequency: 50-60 Hz
Power supply cable length: 1000 mm
Dimensions
Product dimensions: 740 x 895 x 530 mm
Width: 895 mm
Depth: 530 mm
Height: 740 mm
| Dimensions | 53 × 89.5 × 74 cm |
|---|---|
| Automatic Programmes | No |
| Brand | Smeg |
| Smart Appliance | No |
| Energy Efficiency Class | A |
| Colour Group | Grey |
| Intensive Mode | Yes |
| Noise Level | 69 |
| No. Of Fan Speeds | 4 |
| Outlet Type | Duct Out or Recirculation |
| Warranty | 2 |
| Group | Chimney |
| Variant | Wall |
| Product Type | Cooker Hood |
| SKU | KT90GRE |
| GTIN | 8017709303785 |
TYPE
- Product family: Hood
- Hood Type: Decorative wall hood
- Hood width: 90 cm
- Extraction: Expulsion
- EAN code: 8017709303785
AESTHETICS
- Colour: Slate Grey
- Finishing: Gloss
- Aesthetics: Victoria
- Design: Chimney
- Material: Painted material
- Type of steel: Brushed
PROGRAMS / FUNCTIONS
- No. of speeds: 3
- Intensive speed: Yes
CONTROLS
- Control setting: Control knobs
- Control knobs: Victoria
- No. of controls: 2
- Controls colour: Steel effect
TECHNICAL FEATURES
- No. of lights: 2
- Light type: LED
- Light power: 1 W
- Light color temperature scale (°K): 3000 °K
- Free outlet maximum capacity: 820 m³/h
- Motor power: 275 W
- No. of filters: 3
- Anti-grease filters: Aluminium
- Minimum distance from GAS hob: 750 mm
- Vent outlet: 150 mm
- Minimum distance from ELECTRIC hob: 650 mm
- Non return valve: Yes
PERFORMANCE / ENERGY LABEL
- Energy efficicency class ( EEC): A
- Fluid Dynamic Efficiency class (FDEC): A
- Grease Filtering Efficiency Class (GFEC): C
- Lighting Efficiency Class (LEC): A
- Annual Efficiency Consumption (AEChood): 59 KWh/year
- Fluid Dynamic Efficiency (FDE): 30
- Lighting Efficiency (LE): 102.3 lux/W
- Grease Filtering Efficiency (GFE): 76.6 %
- Air flow at minumum speed (Qmin): 334 m³/h
- Maximum extraction rate: 567 m³/h
- Intensive extraction rate: 788 m³/h
- Airbourne acouistical A-weighted sound Power Emission at minimum speed (SPEmin): 49 dB(A)
- Airborne acoustical A-weighted sound Power Emission at maximum speed (SPEmax): 62 dB(A)
- Airbourne acoustical A-weighted sound power emission at boost speed (SPEboost): 69 dB(A)
- Time increase factor (F): 0.9
- Energy Efficiency Index per first cavity: 52.4
- Measured air flow rate at best efficiency point (Qbep): 438 m³/h
- Measured air pressure at best efficiency point (Qbep): 434 Pa
- Measured electric power input at best efficiency point (Wbep): 176 W
- Normal Power of the light system (Wl): 2 W
- Average illumination of the light on the cooking surface (Emiddle): 225 lux
- Sound power level at highest setting (Lwa): 62 dB(A)
ELECTRICAL CONNECTION
- Nominal power: 278 W
- Voltage: 220-240 V
- Frequency (Hz): 50-60 Hz
- Power supply cable length: 1000 mm
SPEED 1
- Extraction rate IEC 61591: 334 m³/h
- Noise level IEC 60704-2-13: 49 dB(A)
- Power: 199 W
SPEED 2
- Extraction rate IEC 61591: 439 m³/h
- Noise level IEC 60704-2-13: 57 dB(A)
- Power: 231 W
SPEED 3
- Extraction rate IEC 61591: 567 m³/h
- Noise level IEC 60704-2-13: 62 dB(A)
- Power: 260 W
INTENSIVE SPEED
- Extraction rate (IEC 61591): 788 m³/h
- Noise level IEC 60704-2-13: 69 dB(A)
- Power: 280 W
LOGISTIC INFORMATION
- Dimensions of the product (mm): 740x895x530
- Width: 895 mm
- Depth (mm): 530 mm
- Product Height (mm): 740 mm
Frequently Asked Questions About the KT90GRE
Is the Smeg KT90GRE suitable for a 90cm hob?
Yes. The Smeg KT90GRE is a 90cm decorative wall hood, so it is well matched to a 90cm hob and gives good coverage across the cooking area. This makes it a strong choice if you want both practical extraction and the Victoria look above a wider cooker or hob.
Can the Smeg KT90GRE be installed as ducted or recirculating?
Yes. The Smeg KT90GRE can be installed for ducted extraction or for recirculating use, depending on your kitchen layout. Ducted installation vents cooking fumes outside, while recirculating installation filters the air and returns it to the room.
Does the Smeg KT90GRE come with charcoal filters?
No. For recirculating use, active carbon filters are required, but official Smeg documentation lists these as accessories rather than standard included items. If you are planning a recirculating installation, it is worth checking that the correct filter kit is added to your order.
How powerful is the extraction on the Smeg KT90GRE?
The Smeg KT90GRE offers 3 speeds plus an intensive setting. Airflow starts at 334 m³/h on the lowest speed, rises to 567 m³/h on maximum speed, and reaches 788 m³/h on intensive mode. That gives you enough flexibility for everyday cooking as well as stronger odours and extra steam.
What is the difference between the maximum and intensive extraction rates?
On the Smeg KT90GRE, the normal top speed delivers 567 m³/h, while the intensive setting boosts extraction to 788 m³/h for short periods when you need faster clearing. This is useful when frying, boiling large pans or cooking foods with stronger aromas.
How noisy is the Smeg KT90GRE?
Noise levels range from 49 dB(A) on the lowest setting to 62 dB(A) on maximum speed, with 69 dB(A) on intensive mode. In practice, that means quieter day-to-day running on lower settings, with more noticeable sound only when you switch to the highest extraction levels.
Does the Smeg KT90GRE have built-in lighting?
Yes. This model has 2 LED lights, each rated at 1W, to illuminate the hob below. The lighting has a warm 3000 K colour temperature and can be used independently of the fan, which is handy both for cooking visibility and softer kitchen lighting.
What style is the Smeg KT90GRE?
The Smeg KT90GRE is part of the Victoria collection, with a gloss slate grey finish, chimney design and classic control knobs with a steel-effect finish. It is designed for kitchens where you want a hood to be a visible feature rather than just a practical appliance.
What filters does the Smeg KT90GRE use?
This model includes 3 aluminium anti-grease filters, which help capture grease from cooking vapours during normal use. These are designed for regular maintenance as part of keeping the hood performing well.
What size vent outlet does the Smeg KT90GRE use?
The Smeg KT90GRE has a 150mm vent outlet. This is useful to know when planning ducting and choosing compatible venting accessories for a ducted installation.
What are the installation clearance requirements for the Smeg KT90GRE?
Smeg states a minimum distance of 650mm above an electric hob and 750mm above a gas hob. These clearances should be followed during installation to help ensure safe and effective use.
Is the Smeg KT90GRE energy efficient?
Yes. The Smeg KT90GRE has an A energy efficiency rating, along with A ratings for fluid dynamic efficiency and lighting efficiency. Its annual energy consumption is 59 kWh/year, so it combines strong extraction performance with relatively efficient day-to-day running.
What are the dimensions of the Smeg KT90GRE?
The product dimensions are 740 x 895 x 530 mm, with a width of 895 mm, depth of 530 mm and height of 740 mm. It is always worth allowing for ducting space and the chimney section when planning the final fitted position.
What controls does the Smeg KT90GRE use?
This model uses 2 Victoria-style control knobs. One controls the lighting and the other controls the fan speeds and intensive setting, which suits the traditional styling of the hood and keeps operation simple.
Who is the Smeg KT90GRE best suited to?
We would recommend the Smeg KT90GRE for buyers who want a 90cm chimney hood with classic styling, solid everyday extraction and the option to install it in either a ducted or recirculating setup. It is especially well suited to traditional kitchens and Victoria range cooker pairings.
*Please be aware we try to be as factual as possible with all our answers but there may be the odd mistake.
Price Match
We always strive to match a competitor’s price when you contact us, but we’ll need a few details from you. To ensure fairness, the product must be offered on a like-for-like basis by an authorised UK retailer. This includes any ancillary items, warranties, and additional services provided.
Requirements +
- Competitor must be a UK-based store or website.
- eBay listings are not eligible.
- Item must be brand new, identical, and offered on the same terms.
- Competitor must have it in stock and ready for delivery.
- We must be able to verify the price and stock status.
- Price match applies to product price only, excluding delivery or additional services.
- Cannot be combined with other offers – price matches void any existing promotions.
How to Request a Price Match
Call us on 01622 541 550
Email us sales@appliancesuperstore.co.uk
Fill out this form