Elica SLEEK2.0-SS-80 Sleek 2.0 80cm Integrated Cooker Hood in Stainless Steel
- Elica 80cm Integrated Cooker Hood – Concealed stainless steel and white glass extractor designed for discreet cabinet integration.
- Powerful Extraction – Three speeds plus booster deliver adjustable airflow from 300 to 690m³/h.
- Perimeter Aspiration – Distributes extraction around the hood perimeter for efficient steam and odour removal.
- LED Strip Lighting – A 7W 3500K LED strip provides clear, efficient hob illumination.
- Energy Class A – Efficient performance with noise levels ranging from 51 to 67dB(A).
£529.00
- Product Info
- Specification
- FAQ's
Shop the Elica Sleek 2.0 80cm integrated cooker hood, model SLEEK2.0-SS-80, with discreet integration and extraction up to 690m³/h.
The Elica Sleek 2.0 is a concealed built-in extractor hood designed to sit discreetly within kitchen cabinetry. Created by designer Fabrizio Crisà, its stainless steel and white glass finish complements minimalist kitchen interiors while providing effective everyday extraction.
Why choose the Elica SLEEK2.0-SS-80 built-in extractor hood?
Choose the Elica SLEEK2.0-SS-80 if you want powerful extraction hidden neatly inside a wall cabinet. Its 80cm stainless steel design suits minimalist kitchens, while 3 speeds plus booster, A-rated efficiency and LED strip lighting make everyday cooking cleaner and easier. Duct-out or recirculating installation adds flexibility, and washable removable filters keep upkeep simple.
Powerful, Adjustable Extraction
Choose from three speed settings and a booster mode to adjust the airflow between 300 and 690m³/h. This helps remove steam, smoke, humidity and cooking odours from the kitchen.
Perimeter aspiration distributes extraction around the edge of the hood for efficient performance. The extraction area is concealed behind a panel, helping the appliance maintain a clean, integrated appearance.
Clear LED Hob Lighting
A 7W 3500K LED strip provides clear, energy-efficient illumination across the hob, making it easier to monitor food while cooking.
Convenient Controls and Maintenance
Electronic push-button controls provide straightforward operation. The delay switch-off timer allows the Elica integrated cooker hood to continue extracting residual odours and humidity after cooking before switching off automatically.
A filter-maintenance alarm helps indicate when attention is required. The removable grease and odour filters are designed to be easy to access, wash and replace, supporting effective maintenance and appliance hygiene.
Integrated Installation Options
This stainless steel integrated cooker hood can be installed for ducted extraction or recirculation when used with the appropriate charcoal filter. Its total-integration design allows it to blend neatly with surrounding cabinetry.
Rated energy class A, the hood operates at noise levels from 51 to 67dB(A).
| Weight | 10.6 kg |
|---|---|
| Dimensions | 29 × 72.3 × 36.7 cm |
| Automatic Programmes | No |
| Brand | Elica |
| Smart Appliance | No |
| Energy Efficiency Class | A |
| Colour Group | Stainless Steel |
| Intensive Mode | Yes |
| Noise Level | 67 |
| No. Of Fan Speeds | 4 |
| Outlet Type | Duct Out or Recirculation |
| Warranty | 2 |
| Group | Canopy |
| Variant | Built In |
| Product Type | Cooker Hood |
| SKU | SLEEK2.0-SS-80 |
| GTIN | 8020283036550 |
| Brand | Elica |
|---|---|
| Product Type | Integrated cooker hood |
| Model | Sleek 2.0 |
| Product Code | SLEEK2.0-SS-80 |
| Manufacturer Reference | PRF0095073A |
| EAN | 8020283036550 |
| Designer | Fabrizio Crisà |
| Colour | Stainless steel and white glass |
| Installation Type | Built-in concealed installation |
| Extraction Type | Ducted or recirculating |
| Energy Rating | A |
| Airflow | 300–690m³/h |
| Speed Settings | 3 speeds plus booster |
| Controls | Electronic push buttons |
| Lighting | 1 x 7W 3500K LED strip |
| Noise Level | 51–67dB(A) |
| Duct Transition | 150mm |
| Absorption | 277W |
| Weight | 10.5kg |
| Dimensions | H 33.9 x W 71.4 x D 28.2cm |
| Key Features | Perimeter aspiration, total integration, delay switch-off, maintenance alarm, removable washable filters |
Installation details
This appliance is sold within the 80cm cooker hood size category. The actual product width is 71.4cm, so cabinet measurements should be checked before installation. Minimum distance from an induction or radiant hob is 50cm. Minimum distance from a gas hob is 65cm. The duct transition is 150mm. Cut-out dimensions and any additional clearance requirements should be confirmed before installation.
Frequently Asked Questions About the SLEEK2.0-SS-80
Is the Elica SLEEK2.0-SS-80 finished in stainless steel or white glass?
The SLEEK2.0-SS-80, manufacturer reference PRF0095073A, is the stainless steel version. The stainless steel and white glass model is a separate variant with a different manufacturer reference.
How wide is the Elica Sleek 2.0 80cm cooker hood?
Although it is sold within the 80cm cooker hood category, the appliance itself measures approximately 71.4cm wide. Its overall dimensions are approximately H 33.9 x W 71.4 x D 28.2cm, so the cabinet and installation space should be checked carefully before purchase.
Can the Elica SLEEK2.0-SS-80 be installed for extraction or recirculation?
Yes. It can vent cooking fumes outside through suitable ducting or operate in recirculation mode with a compatible charcoal filter. The aluminium grease filter is included, while the charcoal filter and ducting accessories required for the chosen installation may need to be purchased separately.
What ducting size does the Elica Sleek 2.0 require?
The hood has a 150mm air outlet. Using ducting with the same diameter, a short route and as few bends as possible helps maintain extraction performance while limiting additional noise.
What is the extraction rate of the Elica SLEEK2.0-SS-80?
The hood provides three standard speeds and an intensive booster setting. Airflow ranges from approximately 300m³/h at the lowest speed to 600m³/h at the highest normal speed, with up to 690m³/h available on booster.
How noisy is the Elica Sleek 2.0 80cm integrated cooker hood?
Noise levels range from approximately 51dB(A) on the lowest setting to 67dB(A) at the highest normal speed. The intensive booster setting reaches approximately 70dB(A), so it is best reserved for short periods of heavy steam or strong cooking odours.
What is perimeter aspiration?
Perimeter aspiration draws air through openings around the edge of the hood’s central panel rather than through a fully exposed filter area. This supports effective capture of steam and cooking fumes while keeping the extractor neatly concealed within the cabinet.
Does the Elica SLEEK2.0-SS-80 have a timer?
Yes. The delay switch-off function allows the hood to continue clearing residual steam and odours before turning off automatically. The timed period is approximately 20 minutes on speed one, 15 minutes on speed two, 10 minutes on speed three and five minutes on the intensive setting.
Does the cooker hood indicate when the filters need attention?
Yes. A maintenance indicator signals when the grease filter requires cleaning. A separate charcoal-filter alert can be enabled when the hood is configured for recirculation, helping the filters receive attention at the appropriate intervals.
Can the aluminium grease filter be washed in a dishwasher?
Yes. The metal grease filter can be washed by hand with a mild detergent or in a dishwasher using a low-temperature, short programme. It should normally be cleaned about once a month, although more frequent cleaning may be needed with regular frying or high-fat cooking.
What lighting and controls does the Elica Sleek 2.0 include?
The hood has electronic push-button controls and a 7W LED strip with a 3500K neutral-white colour temperature. The strip provides even illumination across the hob while using less energy than conventional cooker-hood lamps.
How far above the hob should the Elica SLEEK2.0-SS-80 be installed?
The minimum installation distance is 50cm above an electric, ceramic or induction hob and 65cm above a gas or mixed-fuel hob. A greater distance must be used when required by the hob manufacturer’s installation instructions.
Are there any suitable alternatives to the Elica SLEEK2.0-SS-80 Sleek 2.0 80cm Built In Extractor Hood in Stainless Steel I could consider?
Yes, you could consider the Elica ERA-LUX-SS-80 Era Lux 80cm Stainless Steel Built-In Canopy Cooker Hood as a simpler, lower-cost option with the same brand, size class, stainless steel finish and integrated canopy installation.
Alternatively, the Elica FOLD-S-SS-80 Fold S 80cm Built-In Canopy Cooker Hood in Stainless Steel is a more powerful alternative, offering three speeds plus intensive boost, extraction up to 710m³/h, delayed switch-off and a filter-maintenance alarm. Check the cabinet cut-out dimensions before ordering, as the installation measurements differ between models.
*FAQs are checked against manufacturer information, but please confirm installation requirements before purchase.
Price Match
We always strive to match a competitor’s price when you contact us, but we’ll need a few details from you. To ensure fairness, the product must be offered on a like-for-like basis by an authorised UK retailer. This includes any ancillary items, warranties, and additional services provided.
Requirements +
- Competitor must be a UK-based store or website.
- eBay listings are not eligible.
- Item must be brand new, identical, and offered on the same terms.
- Competitor must have it in stock and ready for delivery.
- We must be able to verify the price and stock status.
- Price match applies to product price only, excluding delivery or additional services.
- Cannot be combined with other offers – price matches void any existing promotions.
How to Request a Price Match
Call us on 01622 541 550
Email us sales@appliancesuperstore.co.uk
Fill out this form