Elica REEF-A-90 Reef A 90cm Chimney Cooker Hood in Stainless Steel & Glass

Frequently Asked Questions About the REEF-A-90

Is the Elica REEF-A-90 suitable for a 90cm hob?

The Elica REEF-A-90 is a nominal 90cm wall-mounted cooker hood designed to provide extraction across a similarly sized cooking area. The position of the burners and the installation requirements of the hob should also be checked before fitting.

Can the Elica REEF-A-90 be used for extraction or recirculation?

Yes. It can discharge cooking fumes through external ducting or operate in recirculation mode. Recirculation requires a compatible activated-charcoal odour filter, while external extraction uses the outlet on top of the hood.

What size ducting does the Elica REEF-A-90 require?

This model has a 150mm duct connection. Using 150mm ducting with a short, direct route helps maintain extraction performance and reduce operating noise. The extraction pipe is not supplied with the hood.

What extraction rates and speed settings does the Elica REEF-A-90 offer?

There are three normal extraction speeds plus an intensive boost setting. Airflow ranges from 255m³/h at the lowest speed to 500m³/h at the highest normal speed, increasing to 600m³/h on boost.

Does the boost setting switch off automatically?

The intensive setting runs for five minutes. At the end of this period, the hood automatically returns to speed two, making boost suitable for dealing with short bursts of heavy steam or cooking fumes.

How noisy is the Elica REEF-A-90?

The sound level is 48dB(A) at the lowest normal speed and 64dB(A) at the highest normal speed. The intensive boost setting has a sound power level of 69dB(A).

How is the Elica REEF-A-90 controlled?

Electronic push-button controls and a display are used to switch the lighting and motor on or off, select one of the three normal speeds and activate the intensive setting. The display also shows speed and filter-maintenance information.

What type of hob lighting does this cooker hood have?

Two 2.5W LED lights illuminate the cooking surface. They provide 3000K lighting with an average illumination level of 381 lux across the hob area.

How high should the Elica REEF-A-90 be installed above the hob?

The lowest part of the hood must be at least 50cm above an induction, radiant or other electric hob and at least 65cm above a gas or mixed-fuel hob. A greater clearance must be used where required by the hob manufacturer.

How does the filter maintenance alarm work?

The display signals that the grease filter needs cleaning after 40 hours of use. When the hood is configured for recirculation, a separate charcoal-filter warning can be enabled and appears after 160 hours of use.

Can the grease filter be washed?

Yes. The removable metal grease filter should be cleaned approximately once a month or when the maintenance warning appears. It can be washed by hand with a mild detergent or in a dishwasher using a low-temperature, short cycle.

What are the finish, weight and energy rating of the Elica REEF-A-90?

This wall-mounted chimney hood combines stainless steel with curved glass and weighs 15.1kg. It has an A energy-efficiency rating, a total power absorption of 205W and a stated annual energy consumption of 44.4kWh under standardised test conditions.

Are there any suitable alternatives to the Elica REEF-A-90 Reef A 90cm Chimney Extractor Hood I could consider?

Yes. You could consider the Elica CRUISE-90 Cruise 90cm Chimney Extractor Hood as a closely matched same-brand 90cm wall-mounted chimney hood, with a stainless-steel finish, touch controls and 3+1 fan speeds.

Alternatively, the Elica THIN-90 Thin 90cm Chimney Extractor Hood is a more premium option with five fan settings, an A energy rating and a lower listed noise level. Both have the same 89.8cm nominal width as the REEF-A-90, although their depth and chimney-height requirements differ, so check the installation dimensions before ordering.

*FAQs are checked against manufacturer information, but please confirm installation requirements before purchase.