Smeg KPF9WH 90cm Chimney Wall Hood White
- 90cm Chimney Wall Hood – Decorative Smeg cooker hood in white with Portofino styling for a distinctive statement finish.
- Powerful Extraction – 3 Speeds plus intensive mode with up to 781 m³/h extraction to clear strong cooking odours quickly.
- Ducted or Recirculating – Flexible installation with charcoal filters included as standard for recirculating use.
- LED Hob Lighting – Twin LED lights provide bright, efficient illumination across the cooking area.
- Easy-clean Filters – Washable stainless steel grease filters are dishwasher safe for simple maintenance.
£766.00
- Product Info
- Specification
- FAQ's
Smeg KPF9WH 90cm chimney wall hood in white brings distinctive Portofino styling, powerful extraction up to 781 m³/h, and bright LED lighting.
The Smeg KPF9WH 90cm chimney wall hood combines statement Portofino design with effective everyday performance. Finished in white with a decorative chimney design, this wall-mounted cooker hood is designed to co-ordinate beautifully with the Smeg Portofino range while helping to keep your kitchen clear of steam, grease and cooking odours.
Smeg KPF9WH Portofino design in white
Part of the Smeg Portofino aesthetic, the KPF9WH is inspired by contemporary Italian styling and creates a distinctive focal point in the kitchen. Its white finish, brushed stainless steel elements and Portofino control knobs give it a premium look that suits both modern and classic spaces.
Powerful extraction with intensive mode
With 3 speeds plus an intensive mode, this 90cm decorative wall hood gives you the flexibility to match extraction power to whatever you are cooking. It delivers airflow from 288 m³/h on the lowest setting up to 630 m³/h at maximum speed, with an intensive extraction rate of 781 m³/h for quickly clearing stronger odours and heavier cooking fumes.
The hood also features a free outlet maximum capacity of 815 m³/h and a 275 W motor, offering dependable performance for busy kitchens.
Ducted or recirculating installation
The Smeg KPF9WH cooker hood offers flexible installation to suit your kitchen layout. It can be used for ducted extraction to expel air outside, or for recirculating operation to filter and return cleaned air back into the room.
Charcoal filters are included as standard for recirculating use. The vent outlet diameter is 150 mm, and the hood includes a non-return valve.
LED hob lighting for clear visibility
Twin LED lights provide bright, efficient illumination across the cooking area, helping you keep a clear view of the hob while preparing meals. The lighting system includes 2 x 2 W LEDs with a 4000 °K colour temperature and an average illumination level of 172 lux.
Easy-clean stainless steel grease filters
For simple maintenance, the hood is fitted with 3 washable stainless steel anti-grease filters. These metal grease filters are dishwasher safe, making it easy to keep the hood performing at its best with less effort.
Energy-efficient performance
Rated A+ for energy efficiency, the Smeg KPF9WH is designed to deliver strong extraction while helping to keep energy use under control. It also achieves A ratings for both fluid dynamic efficiency and lighting efficiency, with annual energy consumption of 40 kWh/year.
Noise levels range from 48 dB(A) at minimum speed to 67 dB(A) at maximum speed, rising to 72 dB(A) on intensive mode.
Key specifications
Model: KPF9WH
Product family: Hood
Hood type: Decorative wall hood
Width: 90 cm
Colour: White
Aesthetic: Portofino
Design: Chimney
Material: Stainless steel + painted material
Controls: 2 Portofino control knobs with steel effect finish
Energy rating: A+
Maximum extraction rate: 630 m³/h
Intensive extraction rate: 781 m³/h
Noise level: 48 to 72 dB(A)
Dimensions: 1227 x 896 x 495 mm
The Smeg KPF9WH 90cm chimney wall hood in white is an ideal choice for anyone looking for decorative Portofino styling, flexible installation, strong extraction performance and easy everyday maintenance.
| Dimensions | 49.5 × 89.6 × 122.7 cm |
|---|---|
| Automatic Programmes | No |
| Smart Appliance | No |
| Brand | Smeg |
| Energy Efficiency Class | A+ |
| Noise Level | 72 |
| Intensive Mode | Yes |
| No. Of Fan Speeds | 4 |
| Outlet Type | Duct Out or Recirculation |
| Warranty | 2 |
| SKU | KPF9WH |
| GTIN | 8017709236359 |
TYPE
- Product family: Hood
- Hood Type: Decorative wall hood
- Hood width: 90 cm
- Extraction: Expulsion
- EAN code: 8017709236359
AESTHETICS
- Colour: White
- Aesthetics: Portofino
- Design: Chimney
- Material: Stainless Steel + Painted Material
- Type of steel: Brushed
PROGRAMS / FUNCTIONS
- No. of speeds: 3
- Intensive speed: Yes
CONTROLS
- Control setting: Control knobs
- Control knobs: Portofino
- No. of controls: 2
- Controls colour: Steel effect
TECHNICAL FEATURES
- No. of lights: 2
- Light type: LED
- Light power: 2 W
- Light color temperature scale (°K): 4000 °K
- Free outlet maximum capacity: 815 m³/h
- Motor power: 275 W
- No. of filters: 3
- Anti-grease filters: Stainless steel
- Minimum distance from GAS hob: 750 mm
- Vent outlet: 150 mm
- Minimum distance from ELECTRIC hob: 650 mm
- Non return valve: Yes
PERFORMANCE / ENERGY LABEL
- Energy efficicency class ( EEC): A+
- Fluid Dynamic Efficiency class (FDEC): A
- Grease Filtering Efficiency Class (GFEC): C
- Lighting Efficiency Class (LEC): A
- Annual Efficiency Consumption (AEChood): 40 KWh/year
- Fluid Dynamic Efficiency (FDE): 36.2
- Lighting Efficiency (LE): 78.2 lux/W
- Grease Filtering Efficiency (GFE): 78.5 %
- Air flow at minumum speed (Qmin): 288 m³/h
- Maximum extraction rate: 630 m³/h
- Intensive extraction rate: 781 m³/h
- Airbourne acouistical A-weighted sound Power Emission at minimum speed (SPEmin): 48 dB(A)
- Airborne acoustical A-weighted sound Power Emission at maximum speed (SPEmax): 67 dB(A)
- Airbourne acoustical A-weighted sound power emission at boost speed (SPEboost): 72 dB(A)
- Time increase factor (F): 1.00
- Energy Efficiency Index per first cavity: 40.3
- Measured air flow rate at best efficiency point (Qbep): 413 m³/h
- Measured air pressure at best efficiency point (Qbep): 476 Pa
- Measured electric power input at best efficiency point (Wbep): 151 W
- Normal Power of the light system (Wl): 2 W
- Average illumination of the light on the cooking surface (Emiddle): 172 lux
- Sound power level at highest setting (Lwa): 67 dB(A)
ELECTRICAL CONNECTION
- Nominal power: 277 W
- Voltage: 220-240 V
- Frequency (Hz): 50-60 Hz
- Power supply cable length: 1000 mm
SPEED 1
- Extraction rate IEC 61591: 288 m³/h
- Noise level IEC 60704-2-13: 48 dB(A)
- Power: 173 W
SPEED 2
- Extraction rate IEC 61591: 421 m³/h
- Noise level IEC 60704-2-13: 63 dB(A)
- Power: 199 W
SPEED 3
- Extraction rate IEC 61591: 630 m³/h
- Noise level IEC 60704-2-13: 67 dB(A)
- Power: 223 W
INTENSIVE SPEED
- Extraction rate (IEC 61591): 781 m³/h
- Noise level IEC 60704-2-13: 72 dB(A)
- Power: 224 W
LOGISTIC INFORMATION
- Dimensions of the product (mm): 1227x896x495
- Width: 896 mm
- Depth (mm): 495 mm
- Product Height (mm): 1227 mm
Frequently Asked Questions About the KPF9WH
What type of cooker hood is the Smeg KPF9WH?
The Smeg KPF9WH is a 90cm decorative wall-mounted chimney cooker hood from the Portofino range. It is designed for installation on the wall above your hob and combines statement styling with strong everyday extraction.
Can the Smeg KPF9WH be used for ducted and recirculating installation?
Yes. The Smeg KPF9WH can be installed for either ducted extraction or recirculating use. For ducted installation, it uses a 150mm vent outlet. For recirculating setup, compatible charcoal filters are required.
Does the Smeg KPF9WH include an intensive mode?
Yes. This model has 3 standard speeds plus an intensive setting. The intensive mode is useful when you need a short burst of extra extraction power for strong cooking odours, steam or smoke.
How powerful is the Smeg KPF9WH extractor hood?
The Smeg KPF9WH offers extraction rates from 288 m³/h on the lowest speed up to 630 m³/h on the highest standard setting, with an intensive extraction rate of up to 781 m³/h. This makes it a strong choice for larger cooking areas or more demanding everyday use.
Is the Smeg KPF9WH suitable for a 90cm hob or range cooker?
Yes. With its 90cm width, the Smeg KPF9WH is well matched to 90cm hobs and range cookers, especially within the Smeg Portofino collection. It gives good coverage across the cooking area while maintaining a balanced look in the kitchen.
What kind of lighting does the Smeg KPF9WH have?
This model includes 2 LED lights to illuminate the hob area below. LED lighting is efficient, long-lasting and gives you a clearer view while cooking.
Are the filters easy to clean on the Smeg KPF9WH?
Yes. The Smeg KPF9WH has 3 stainless steel anti-grease filters, and they are washable for easier maintenance. This helps keep the hood working efficiently and makes routine cleaning more straightforward.
How noisy is the Smeg KPF9WH?
Noise levels range from 48 dB(A) on the lowest setting to 67 dB(A) on the highest standard speed, rising to 72 dB(A) on intensive mode. That gives you the flexibility to use a lower, quieter setting for general cooking and a higher setting when extra extraction is needed.
What controls does the Smeg KPF9WH use?
The Smeg KPF9WH uses 2 Portofino-style control knobs. These give the hood a distinctive look and make it easy to adjust the fan speed and lighting.
What are the dimensions of the Smeg KPF9WH?
The product dimensions are 1227 x 896 x 495 mm. This model is 896mm wide and 495mm deep, so it is worth checking your wall space, ceiling height and installation clearances before ordering.
What is the energy rating of the Smeg KPF9WH?
The Smeg KPF9WH has an A+ energy efficiency rating. This makes it a good option if you want strong extraction performance with lower running costs than a less efficient model.
What minimum clearance is needed above the hob?
The minimum installation distance is 650mm above an electric hob and 750mm above a gas hob. Following these clearances is important for safe installation and best performance.
*Please be aware we try to be as factual as possible with all our answers but there may be the odd mistake.
Price Match
We always strive to match a competitor’s price when you contact us, but we’ll need a few details from you. To ensure fairness, the product must be offered on a like-for-like basis by an authorised UK retailer. This includes any ancillary items, warranties, and additional services provided.
Requirements +
- Competitor must be a UK-based store or website.
- eBay listings are not eligible.
- Item must be brand new, identical, and offered on the same terms.
- Competitor must have it in stock and ready for delivery.
- We must be able to verify the price and stock status.
- Price match applies to product price only, excluding delivery or additional services.
- Cannot be combined with other offers – price matches void any existing promotions.
How to Request a Price Match
Call us on 01622 541 550
Email us sales@appliancesuperstore.co.uk
Fill out this form